CS-Lab Support Forum for CNC Community
Help to run this brand-new forum and stay with us.
Ask your questions, we are here to help!
G00 Z does not work
Hello, although I searched for the macros, in the post processor etc., the GOO Z4O lines do not bring up my Z axis before moving X and Y. It works in N0014 but afterward, it no longer moves.
Can you help me?
also, when I make a Z zero and I press "go to zero", the zero axis starts moving towards where it was before the Z zero.
THANKS.
Uploaded files:
These G28 commands return the axes to their home positions (machine zero) in relative mode (G91) and then switch back to absolute mode (G90).
maybe that the probleme
here a gcode working find on my simcnc done by fusion360
%
(filename)
(tool T10 D=12. CR=0. - ZMIN=-60. - FRAISE DEUX TAILLES)
G90 G94 G17 G49 G40 G80
G21
G28 G91 Z0.
G90
G28 G91 X0. Y0.
G90
(CONTOUR 2D6)
T10 M06
S24000 M03
G54
M08
G00 X-16.319 Y-70.239
G43 H10
Z15.
Z5.
G01 Z1.2 F5440.
X-16.317 Y-70.232 Z1.066 F8640.
X-16.311 Y-70.21 Z0.933
X-16.302 Y-70.174 Z0.804
X-16.29 Y-70.124 Z0.679
X-16.274 Y-70.061 Z0.562
By default,
there is no 'Go to Zero' for Z in SimCNC? Maybe I’m wrong, could you take a screenshot of it?
Voici les photo,
-
when I do the Z O maneuver (photo 1), the Z indicates 0 (photo 2), then I click on GO To 0 (photo 3), the Z moves and stops at any position (photo 4) -
Also, when I test my THC, CSmi0/IPs receives the information, but the Z does not move. Or, it should go from top to bottom. photo pin 25/26
In my case, I can't click 'Go XY' if my homing is not done.
Your homing is not completed here; I can see the orange bar under Z.
it shloud be green like in that video https://www.youtube.com/watch?v=VRR2ChF2nfs&t=2s
Show me it by recording a video showing the simCNC screen.
in the Go to XYZero button script, you must remove the G53. I solved the problem like this.
PARTNERS:
USA
Germany
Slovenia / Bosnia
Spain
South Africa
The Netherlands
Portugal
Greece
Hungary
Bulgaria
Kenya
Egypt
China
Serbia
Italy
Denmark
Finland
