CS-Lab Support Forum for CNC Community

Help to run this brand-new forum and stay with us.
Ask your questions, we are here to help!

ForumCSMIO/IP controllers and Software - discussion forum: CSMIO/IP with simCNC softwareHoming speed not follow FRO

You need to log in to create posts and topics.

Homing speed not follow FRO

#1 · 21 September 2024, 15:32

Hello,

Is it possible to set homing to follow feedrate setting?

I have long working area but still precise control so I dont want to go to homesensor with high speed, but if my axis are stopped to another end of the machine it takes lot of time to home machine. (8000mm of stroke and homing speed 25mm/s takes at least 6mins to home).

If i set homing speed to eg. 100mm/s and slower it with FRO setting to 25% it goes as slow as needed to home sensor, but I can run faster the 90% of lenght.

#2 · 14 October 2024, 20:28

To adjust the FRO setting, you need to stand near the machine and monitor the movement. So why don't you just "jog" your long axis to a point near to your reference switch before starting the reference movement?

Best Regards

Thorsten Ostermann

#3 · 15 October 2024, 06:54

Quote from Thorsten Ostermann on 14 October 2024, 20:28

To adjust the FRO setting, you need to stand near the machine and monitor the movement. So why don't you just "jog" your long axis to a point near to your reference switch before starting the reference movement?

Best Regards

Thorsten Ostermann

Yes I would do that, but cannot find option to jog before homing?