CS-Lab Support Forum for CNC Community

Help to run this brand-new forum and stay with us.
Ask your questions, we are here to help!

ForumCSMIO/IP controllers and Software - discussion forum: CSMIO/IP with simCNC softwareTool wear compensation

You need to log in to create posts and topics.

Tool wear compensation

#1 · 15 July 2025, 13:58

HI

~~I need some help with applying tool wear compensation.~~

I have tried a couple of ways but with no success.

Tried by just ajusting the wear offset in the tool table. No success.

Tried G10

G21

Go G17 G40 G49 G80 G90

T102M6

G54 G10 L24 P102 R11.9

With G10 I get a motion group not set in line 10: G10 L24 P102 R11.9

Not sure if Im even on the right track. Search the forum with no success.

Any help would be apreciated.

Regards

Deon

#2 · 15 July 2025, 21:04

Watched Anton's vid on G41/G42.

Will be trying that tomorrow on the machine.
With a virtual test device it gives me a error message on G41 when loading the GCode but I think its because the Virtual device is version 3.406.
And I believe G41 has only been implemented from Version 3.5

Will report back
Regards
Deon

#3 · 15 July 2025, 21:15

Yes.
Problem resolved. G41/G42 is only supported from ver 3.5 onwards.

Thanks Guys

Happy chips

Deon

erwan has reacted to this post.

#4 · 25 July 2025, 07:16

Currently G10 only supports work offset change - e.g.

G10 L2 P10 x10 y20 - change work offset 10 XY to 10;20

If you want change e.g. tool 1 diameter wear you have to use machine params:

#6025=0.2

Look into machine parameters table (menu Diagnostics / Parameters Table) from #6010 and up.

PARTNERS:

USA

Germany

Slovenia / Bosnia

Spain

South Africa

The Netherlands

Portugal

Greece

Hungary

Bulgaria

Kenya

Egypt

China

Jun Ma

Serbia

Italy

Denmark

Finland