6 axis JOG handwheel encoder ISMM2080
259.00 €
* Price excl. VAT, for EU private customers (no EU VAT id.) 23% VAT applies.
MPG – Manual Pulse Generator – JOG handwheel
A tool for quick configuration of a material base (G54, G55 …), tool magazine (tool length offset), as well as for manual machining or fast manual rides (requires CSMIO-MPG module available separately or in the MPG Kit). Connection with CSMIO-MPG is extremely simple and shouldn’t take more than 5 minutes, even for inexperienced users.
How to run it?
- Fasten the module on a DIN rail
- Place the DB25 plug of the JOG handwheel in the CSMIO-MPG module socket.
- Connect the CAN bus with the included DB9 tape
- Connect 24V DC power.
- Connect E-STOP circuit to terminals E1 and E2 (order of the connections is not important). Terminals E1 and E2 are pins of the handwheel E-STOP button.
|
ISMM2080 |
– |
001 |
100 |
B |
– |
5 |
L |
|
Series |
|
Sequence |
Number |
Output |
|
Supply |
Output |
|
ELECTRICAL SPECIFICATION |
|
|
Output wave |
Square wave |
|
Output signals |
A,B, (Line driver output A,A(_),B,B(_), phase) |
|
Current consumption |
≤100mA |
|
Response Frequency |
0~20KHz |
|
Output phase difference |
90° ± 45° |
|
Supply voltage |
5VDC, 12 VDC |
|
Signal level |
VH ≥ 85%Vcc, VL ≤ 0.3V |
|
Number of pulses |
100 |
|
Output circuit |
Open collector NPN, Push pull, Line driver, Voltage |
|
MECHANICAL SPECIFICATION |
|
|
Signal position |
2kind |
|
Speed without sealing |
500 rmp |
|
Starting torque w/o sealing |
≤2.0x 10-2 ~6.0x 10-2 Nm (+25°C) |
|
Shock resistance |
980m/s2, 6ms, 2 times each on XYZ |
|
Vibration proof |
50m/s2, 10~200Hz, 2 hours each on XYZ |
|
Working life |
MTBF≥ 10000h (+25°C, 2000rpm) |
|
Weight |
Appr. 740g (incl. 1.5 meter cable) |
|
ENVIRONMENTAL SPECIFICATION |
|
|
Working humidity |
30~85% (No condensation) |
|
Storage temperature |
-30°C ~85°C |
|
Working temperature |
-10°C ~7O°C |
|
Protection class |
IP54 |
|
ELECTRICAL SPECIFICATION OF SELECTION SWITCH |
||||
|
Switch load |
0.4VA |
Max. voltage |
25V |
|
|
Circuit width |
0.1-50mA |
|
||
|
ELECTRICAL SPECIFICATION OF CONTROL SELECTION |
||||
|
Connection Point |
AC Max. load |
AC220VV 0.5A |
||
|
DC Max. load |
DC24V1A |
|||
|
ELECTRICAL SPECIFICATION OF STOP SWITCH |
||||
|
Connection Point |
AC Max. load |
AC220V0.5A |
||
|
DC Max. load |
DC30V1A |
|||
Manual
