Home » Hitachi WJ200

Tag Archives: Hitachi WJ200

Connection of CSMIO/IP-M controller and FVD Hitachi WJ200 (Omron MX2) with simCNC, Mach3 and Mach4

Interestingly, the Hitachi WJ200 and the Omron MX2 are the same FVD only under two brands. The diagram below is made in three versions (simCNC and Mach3/Mach4).

1. Connection of CSMIO/IP-M controller with Hitachi WJ200 (Omron MX2) and simCNC Open the PDF file for larger drawing details

2. Connection of CSMIO/IP-M controller with Hitachi WJ200 (Omron MX2) and Mach3

Open the PDF file for larger drawing details

3. Connection of CSMIO/IP-M controller with Hitachi WJ200 (Omron MX2) and Mach4

Open the PDF file for larger drawing details

[Source:] The diagram was created by CS-Lab’s Technical Support section for CSMIO/IP users.

9 December 2021

Connection diagrams of CSMIO/IP-S controller to DELTA VFD-EL (simCNC and Mach3 / Mach4)
Learn how to properly connect the CSMIO / IP-S controller to the DELTA EL inverter based on simCNC,…
Connection of CSMIO/IP-M controller and FVD Hitachi WJ200 (Omron MX2) with simCNC, Mach3 and Mach4
In the article, you will find connection diagrams of the CSMIO / IP-M controller and simCNC software…
Surface scanning with the use of CSMIO/IP controller and Mach3 (M40)
In the case of CSMIO/IP controllers, the measurement start-up procedure looks a bit different from t…
Connection of CSMIO/IP-S controller and stepper drives HBS86, HSS86, 2DM860H, 2HSS57-KH (simCNC, Mach3, Mach4)
The schemes will help you to connect the CSMIO/IP-S controller and stepper drives.
How to check if the CSMIO/IP controller step/dir outputs are damaged?
To verify whether the step/dir output of a CSMIO/IP controller is damaged, you can do simple but pro…
Connection of THC with simCNC (THC Analog Smart, THC Digital)
Diagram for two types of connection THC Analog Smart and Digital
Connection of CSMIO/IP-A controller and DELTA ASD B2 (simCNC, Mach3 and Mach4)
Take a look at the latest diagram prepared by our technical department. You will learn how to proper…
Connection of CSMIO/IP-A controller and DYN4 (simCNC, Mach3 and Mach4)
Our technical department has prepared new diagrams for connecting the CSMIO / IP-A controller. This…
Connection of CSMIO/IP-M controller with stepper drives HBS86, HSS86, 2DM860H, 2HSS57-KH (simCNC, Mach3, Mach4)
We publish new schemes. This time it will help in connecting the CSMIO/IP-M controller with the step…
Connection of CSMIO/IP-M controller with Lexium 28A and BCH2 Servo (simCNC, Mach3, Mach4)
Diagram for CSMIO/IP-M with Lexium 28A and BCH2 Servo

See all »

CS-LAB s.c. Janusz Wawak, Andrzej Rogozynski, Szymon Paprocki

Wojska Polskiego 65A
85-825 Bydgoszcz
office@cs-lab.eu
+48 52 374-74-34
+48 505 454 781

Search