|
PARAMETER |
CSMIO/IP-S |
CSMIO/IP-A |
CSMIO/IP-M |
| Number of axes | 6 |
6 |
4 |
| Digital inputs number |
32 |
24 |
12 |
| Digital outputs number |
16 |
16 |
4 |
| Relay outputs number |
– |
– |
2 |
| Analog inputs number |
4 |
4 |
2 |
| Analog outputs number |
2 |
6 (+/- 10V) |
2 |
| Supply voltage |
24VDC +/-10% |
24VDC +/-10% |
24VDC +/-10% |
| Power consumption |
5W |
5W |
5W |
| Maximum voltage on in/out lines |
30VDC |
30VDC |
30VDC |
| Maximum load of output line |
250mA |
250mA |
250mA |
| Voltage range of analog inputs |
0-10VDC |
0-10VDC |
0-10VDC |
| Maximum load of analog output |
5mA |
5mA |
5mA |
| Axis drives control type |
Step/Direction (STEP/DIR) |
Analog |
Step/Direction (STEP/DIR) |
| Maximum frequency of STEP signal |
4MHz |
– |
125kHz |
| STEP signal fill factor |
50% |
– |
50% |
| PC connection type |
Ethernet 10/100Mb |
Ethernet 10/100Mb |
Ethernet 10/100Mb |
| Ambient temperature range |
0oC to +60oC |
0oC to +60oC |
0oC to +60oC |
| Relative humidity (without condensation) |
10% – 95% |
10% – 95% |
10% – 95% |
| CSMIO-MPG module support |  |
|
|
| CSMIO-IO module support | |
|
 |
| CSMIO-ENC module support | |
|
|
| Backlash compensation | |
|
|
| Homing on INDEX | |
|
|
| Slave axes | |
|
*basic |
| THC analog mode | |
|
|
| Spindle axis | |
|
|
| #G32# threading | |
|
|
| RIGID TAPPING | |
|
|
| Closed Loop Spindle Control | |
|
|
| Feedback | |
|
|