Delta servo drives ASDA-B2
The ASDA-B2 series sets are a universal solution for servo drive systems, combining precision and intuitive parameterization. Both impulse and DMCENT high-speed industrial network models are available. ASD-B2 servo drives are advanced devices with rich functionality and a reasonable price.
The set consists of:
- Servo Driver B2 1.5 kW 1x230V 160 000 pulses/rev.
- Servo Motor B2 1.5 kW 7.16Nm 2000 rpm 130mm. With brake
- Power wire (with brake) 5m (3m, 10m, 15m available on request)
- Encoder wire 5m (3m, 10m, 15m available on request)
Basic ASDA-B2 parameters
- Power range: 0.1KW ~ 1.5KW
- Supply voltage: 200 V AC ~ 230 V AC, 1-phase
- Overload capacity: up to 300%
- Enclosed communication ports: RS232 / 485 with ModbusRTU / ASCII protocol and DMCNET network
- Built-in braking transistor and braking resistor for power from 750W and up
- Configurable position regulator response frequency up to 500 Hz
- Free utility software for configuration, parameterization and monitoring of servo drive operation
Specifications
A High-resolution encoder with 17-bit (160,000 p/rev) is equipped as a standard feature which satisfies the application needs of high precision positioning control and stable rotation at low speed.
Satisfy High Precision Positioning Requirements
- Support pulse input (up to 4Mbps) and analog voltage two kinds of command.
- Built-in position, speed and torque three control modes (speed and torque mode could be controlled via internal parameters or analog voltage command).
- There auto notch filters are provided to suppress the mechanical resonance automatically and make the system operate more smoothly.
Offer Easy-To-Install Solution for Simple Start-Up
- Motor sizing software is offered for the customers to conduct the estimation of the equipment conveniently.
- ASDA-Soft configuration software (tuning software) is provided for the customers to meet the performance requirements quickly.
- Easy-to-use digital keypad is ideal for setting parameters and monitoring the servo drive and motor directly.
- Servo motor provides brake, oil seal etc. optional configurations for the requirements of different applications.
Reduce Maintenance and Wiring Cost for Versatile Operation
- Existing power cables and encoder cables for ASDA series could be used still. When upgrading, there is no need to purchase new accessories.
- The control circuit and main power circuit is separated, safety is increased and maintenance is much easier.
- 400W and above servo drive is built-in with regenerative resistor, significantly save the wiring and cost.
- Two analog input terminals (CN5) are provided, easily monitor and the status of the servo motor.
The set consists of:
- Servo Driver B2 1.5 kW 1x230V 160 000 pulses/rev.
- Servo Motor B2 1.5 kW 7.16Nm 2000 rpm 130mm. With brake
- Power wire (with brake) 5m (3m, 10m, 15m available on request)
- Encoder wire 5m (3m, 10m, 15m available on request)