Important: the simCNC 3.406 offline version is available, so you can use your 3.406 profile backup file and quickly return to it. Remember to back up the file before installing the latest version.
SimCNC control software (WindowsOS)
MINIMUM REQUIREMENTS: PC – Windows 10, 64bit, i3 processor, 4GB RAM Dual Channel, CSMIO/IP controller – FP4 version, CSMIO Firmware v3 (included).
SimCNC control software (MacOS)
MINIMUM REQUIREMENTS: PC/OS: Apple Macintosh Intel 64bit, MacOS (updated) CSMIO/IP controller: FP4 version CSMIO Firmware v3 (included).
SimCNC control software (LinuxOS)
MINIMUM REQUIREMENTS: PC/OS: Ubuntu Linux 20.04 LTS 64bit. (other versions not tested or supported). Internet connection required, the installer was tested with a clear standard LinuxOS, we do not guarantee correct operation with non-standard or modified Linux distributions. CSMIO/IP controller: FP4 version CSMIO Firmware v3 (included).
SimCNC control software for RaspberryPi (installer for Linux-ARM64)
MINIMUM REQUIREMENTS: RaspberryPi 4 (4GB RAM or more). For more convenient operation and handling of more complex files, additional cooling and overclocking up to 2.0GHz is recommended. Wired network connection. SD card with a capacity of min. 32GB. Read more about installation in simCNC for RaspberryPi manual