CS-Lab Support Forum for CNC Community
Help to run this brand-new forum and stay with us.
Ask your questions, we are here to help!
Forum Navigation
Drill Problem
#1 · 9 February 2023, 08:31
Hello,
I have a problem with drilling cycles with Simcnc. As can be seen in the picture, this message always comes up as soon as there is a drilling cycle in the code. I can only fix this by writing a G0 in front of the Z25. The code is created with Solidcam, post processor is a Haas for 3 axis. This one has worked in Mach 3, 4 and UCCNC for years.
The controller is an IP/A.
I've also tried other postprocessors, e.g. Fanuc, but there are also problems with the code.
Is there a solution to the problem for Simcnc?
Thanks
Greetings René
Uploaded files:
#2 · 9 February 2023, 14:15
Hi,
G80 cancels the motion mode (cancels/overrides G1, G2, G3, G81, G82 and G83).
This means that after the G80 command simCNC does not know what Z25 means.
Therefore, you must add a G0 command (G0 Z25) before Z25.
In order not to do the gcode correction manually you will have to edit the postprocessor.
Wojtek
Toecutter has reacted to this post.
Toecutter
PARTNERS:
USA
Germany
Slovenia / Bosnia
Spain
South Africa
The Netherlands
Portugal
Greece
Hungary
Bulgaria
Kenya
Egypt
China
Serbia
Italy
Denmark
Finland
