Quote from CS-Lab Support on 22 March 2023, 06:59

Hi,

An example of using digital inputs and outputs is at the beginning of this manual

https://en.cs-lab.eu/wp-content/uploads/2020/06/simcnc-python-scripts-guide_en.pdf

Quote from alexanderbeese on 22 March 2023, 07:57

Quote from CS-Lab Support on 22 March 2023, 06:59

Hi,

An example of using digital inputs and outputs is at the beginning of this manual

https://en.cs-lab.eu/wp-content/uploads/2020/06/simcnc-python-scripts-guide_en.pdf

Thanks for the fast answer.
But using this guide is not working.
I get only error messages.

example: using this
mod_IP = d.getModule( ModuleType.IP, 0 )

 

is not working..

EDIT:

I attached the message if i use this

Quote from CS-Lab Support on 22 March 2023, 17:13

The guide is definitely fine because I wrote it myself 😉

See the message highlighted below:

Python tells you that you have an indentation problem.
Python doesn't use parentheses for conditions and loops, only indentation.
The indentation can be a space or a tab, read about it on the Internet.

You can also send me the macro for correction.

Quote from alexanderbeese on 31 March 2023, 09:08

Hello and thank you for the help.
I have copied the text from the guide.
the formatting as the indentation is not taken into account when pasting.
That was the whole mistake.
The file works now