CS-Lab Support Forum for CNC Community
Help to run this brand-new forum and stay with us.
Ask your questions, we are here to help!
Vcarve simCNC laser post processor
Hi I've become stuck down a rabbit hole with this issue, the post processor that is listed in the download section will not load into vcarve and their generic pp seems to use spindle on/off as power? control.
HHas anyone got this combo working? Annoyingly it seemed to work about 6 weeks ago
As ever Chris
Hi
I checked the postprocessor loads, but it is not always visible the first time in the table of available postprocessors.
I recorded a video showing how to make the first engraving test (it's now also placed under the Vectric postprocessor download)
https://en.cs-lab.eu/technical-support/download/scripts-postprocessors-addons/postprocessors/
It's clearly a vectric issue, I had to create a new machine which then loaded the pp properly. I tried my original machine subsequently but it still refused to load.
I ran my test path which kind of works, but the m15 is used after each segment. It causes the mc to return home and turn the laser off
6 weeks ago I successfully ran a 4 letter word many times over at different speeds, but I didn't document the process.
I have tried a generic laser pp and this uses S as the power setting 'on the fly'
Thanks for looking
PARTNERS:
USA
Germany
Slovenia / Bosnia
Spain
South Africa
The Netherlands
Portugal
Greece
Hungary
Bulgaria
Kenya
Egypt
China
Serbia
Italy
Denmark
Finland
